Site Information

 Loading... Please wait...
  • Image 1

MAG-ic Probe PRO Software for MAC


Product Description

WARNING - Please read carefully before purchase.

If you are using OSX10.10 Yosemite or above, It seems Apple have changed the way it accepts connections from USB Serial devices. At this stage we do not know if all users will experience the same problems as we and a few users have.

We would advise that you use a powered USB Hub when using the MAG-ic Probe on a MAC with OSX10.10 and above. Any cheap hub should work but if you have doubts please use a Windows Based computer. Some have solved the issue with a shorter USB Cable. Before purchasing the PRO Version, please download the FREE LITE version and confirm that you can get the Serial Port operating with your MAC.

Once you have confirmed this, you can purchase with confidence.



NEW!! Finally the MAG-ic Probe PRO software is now available for MAC. See Bottom of page to Purchase.

The PRO software will do everything the Lite software offers but much more.

The PRO software will take your measurements and show them in a full color contour map of the instrument.



Added better enumeration of the Serial Port Identifier.

Added identifier for currently loaded file. Manual Entry is added so you do not need to own a MAG-ic Probe unit in order to use the PRO software.

Now you can save Master files of your repeated Instruments - Outline, Cutouts and Pre-Mapped measuring locations can be saved in a Master File. Then when you are measuring a new instrument, simply load the saved file and start measuring.

MAG-ic Probe PRO version software allows you to document, archive and visualize your instruments like never before.

MAG-ic probe PRO offers all the great features of the Lite version, but goes much further, allowing a fully customizable color contoured representation of your instrument.

You can define your own color combinations and grid properties.

  • When you purchase the PRO software and run it, you will be given a hardware ID which you will email to us at You can click OK and run continue using the software for 5 days after which you require a license key issued by us. Please send us the hardware ID at your earliest convenience.




MAG-ic Probe is the only software available that allows you to automatically capture measurements taken from your measuring instrument directly to your computer and record those measurements on an image of the actual instrument or object being measured.

Now you have the ability to visualize the instrument in full color instead of just comparing numbers. You can see the high and low spots of your work and how they blend to each other. Compare 2 or more instruments visually without deciphering the numbers.


DEMO VERSION - If you would like to try a demo version first, please go to the DEMO version on the Software Product page.

The full version cannot be returned once a License key has been issued so please try out the Demo version first.

Full video tutorials on the software can be viewed here.

MAG-ic Probe PRO - Video Overview


MAG-ic Probe PRO Tutorial 1 - Connecting the Device.


MAG-ic Probe PRO Tutorial 2 - Overview of user interface


MAG-ic Probe PRO Tutorial 3 - Entering Measurements


MAG-ic Probe PRO Tutorial 4 - Contouring


Product Reviews

Write Review

  1. Impressive 5 Star Review

    Posted by on 17th Jul 2017

    I love the concept. It took a bit of wrangling with Mac OS to set up, but the support was great. Immediate and clear responses.

Find Similar Products by Category